Cattle Lallemand offers tips to avoid fall slump in dairy cow production
Sản phẩm khuyên dùng
Máy thổi khí AT thiết kế nhỏ gọn, lưu lượng khí lớn, áp suất mạnh. Phù hợp để lắp đặt sục khí ao nuôi tôm, trại giống, ương tôm, nuôi tôm nhà màng …
Sản phẩm khuyên dùng
Tima - Tủ điều khiển ứng dụng mạng không dây LoRa. Tima sử dụng giao thức truyền dữ liệu không dây tầm xa LoRa điều khiển thiết bị như máy bơm nước, động cơ điện…
Sản phẩm khuyên dùng
Chúng tôi tự hào giới thiệu Ống thông khí Nano-Tube bọt khí mịn, oxy hoà tan cao, cải tiến quan trọng để khuếch tán oxy hoà tan trong nước phục vụ nuôi tôm công nghệ cao.

Lallemand offers tips to avoid fall slump in dairy cow production

Author WattAgNet, publish date Saturday. September 8th, 2018

Lallemand offers tips to avoid fall slump in dairy cow production

Change from old corn silage to freshly cut forage can create problems

Dairy cows commonly fail to reach their full production potential during the fall. This is often caused by an abrupt change from old corn silage to freshly cut forage or recently fermented corn silage.

“A slump in production can be costly for a farm and frustrating for producers,” says Renato Schmidt, Ph.D., technical services – forage, Lallemand Animal Nutrition. “We often see otherwise unexplained decreases in milk production or an inability to reach production targets in the fall as producers switch from old silage to new material. This slump can also affect herd health with signs such as a decreased feed intake or loose manure.”

Contributing factors to a fall slump may include:

  • Lower starch digestibility in fresh silage or forage. When harvested above 35 percent dry matter (DM), the starch in corn starts to become less digestible. Flint varieties also have lower starch digestibility than floury ones.
  • High levels of fermentable sugars. Fresh forages can contain high levels of fermentable sugars, which can contribute to sub-acute rumen acidosis (SARA) in a herd.
  • Differences in DM and nutrient content. Silages normally present a different composition from one silo to the next, and from one year to the next.

To avoid a fall slump, Schmidt recommends four strategies:

  • Ideally allow silage to ensile for at least four months before feeding. As silage spends additional weeks in storage, the starch becomes more digestible.
  • Change silos gradually over a two-week period.
  • Test new forages for DM and nutrient content. If necessary, the ration should be adjusted to reflect the changing composition.
  • Use a proven silage inoculant containing enzymes to help break down plant fiber and thus aid in fiber digestibility.
  • Thinking ahead to next year, Schmidt recommends considering an inoculant that will help maintain feed quality.  The strain Lactobacillus buchneri 40788 is the only active bacteria reviewed by the FDA in preventing heating and spoilage – two factors that can greatly affect silage quality.

“Planning ahead and making gradual changes in feeding can help keep milk production steady and maintain cattle health,” Schmidt says. “Ultimately, it helps keep profits steady for the farm.”


Sản phẩm khuyên dùng
Máy thổi khí AT-80 đang rất được ưa chuộng hiện nay trên thị trường, lưu lượng khí lớn, hoạt động mạnh mẽ.
Sản phẩm khuyên dùng
Tima - Tủ điều khiển ứng dụng mạng không dây LoRa. Tima sử dụng giao thức truyền dữ liệu không dây tầm xa LoRa điều khiển thiết bị như máy bơm nước, động cơ điện…
Fiber-degrading enzymes increase dairy cow milk production Fiber-degrading enzymes increase dairy cow… The high cost of metabolic diseases in dairy cattle The high cost of metabolic…