2 Lua
Paddle Wheel Aerator 2HP Paddle wheel aerators

2HP Paddle wheel aerators

Vews: 6216
  • Supply Ability
    100 (Set/Month(s))
  • Shipping Place
    Hồ Chí Minh
  • Min. Order
    1 Set
  • Payment Terms
    Cash, Bank Transfer
  • Shipping Methods
    Seaport, Air flight, DHL, FedEx, TNT, EMS, Shipping services
  • Shipping Time
    3 - 5 days
  • Place of Origin
  • Packing Details
  • Dimensions
    L165 x W222 x H90 cm
  • Weight
    96 KG
  • Price:
    • Contact
  • Notes:
    • Excluded Tax
    • Excluded Shipping Fee

HS's Paddle wheel aerator is 4-wheel structure with three floating boat and big stainless steel frame while using 1.5kW motor and high-quality reducer so that the paddle wheel aerator can be more stable and not easy to swing during operation. However, there are four wheel for the oxygen generation and create a bigger water flow and more dissolved oxygen. It can decrease the quantity of paddle wheel use and reduce the cost of purchase.

HS-A240a Paddle wheel aerator could provide oxygen for 800kg of black tiger shrimp or for 1200kg of white shrimp (vanname shrimp) comparing the 2-wheel paddle wheel for 500kg of black tiger shrimp or 800kg of white shrimp, but also provides a higher level of dissolved oxygen in large.

The entire unit, including gear reducer and motor, has a one-year warranty (warranty requires the gear oil be changed after the first 3 months - use SAE 90 oil). Ships motor freight only.

Paddle wheel aerator specifications


Items of Paddle wheel aerator


Product type


MOTOR IE3 - 2HP (1.5 kW)
Voltage: 220V/380V, 3 phase, 50Hz/60Hz
Speed: 4 Poles - 1450 R.P.M
Weight: 23 KG

1 pc / unit

Reducer Spiral Gear #90
Transmission ratio 15:1
Low drag make the energy saving
Cast iron body with arcutae-bevel gear
Weight: 25 KG

1 pc / unit
3. Impellers
Material: NYLON
One piece molded
Toughness with corrosion
Dimensions: 66.8 x 20 cm
Weight: 3.2 KG / PC
4 pcs / unit
4. HDPE Float
Material: HDPE
One piece blow mold
Resist impact, acid-alkalinity and UV
Dimensions: 165 x 32.5 x 23.5 cm
Weight: 6.4 KG/PC
3 pcs / unit

Material: #304 Stainless steel
Type: Solid
Dimensions: d25 x 845 mm
Sturdy and durable
Weight: 3.3 KG / PC

2 pcs / unit

Material: #304 Stainless steel
Dimensions: 1675 x 725 x 35 mm
Sturdy and durable
Weight: 8 KG / PC

1 pc / unit
7. Plastic Bearing
Material: PVC
Rubber bushing for low friction
Easy to assemble
Dimensions: 4 x 13 x 14 cm
Weight: 0.25 KG / PC
2 pcs / unit
8. Movable Joint
Material: #304 Stainless steel + Rubber
Dimensions: d24.5 + d 28.5
13.5 x 13.5 x 9 cm
Weight: 1.5 KG / PC
2 pcs / unit
9. PA Motor Cover
Material: HDPE
One piece blow mold
Resist impact, acid-alkalinity and UV
Dimensions: 24 x 27 x 66 cm
Weight: 2 KG / PC
1 pc / unit
: : Warranty 12 months
: : Certifications CO, CQ


Good practices for developing dissolved oxygen for your shrimp farming

Proper feed management will maintain the good water quality in the cultured ponds leading to a successful yield. However, good food management is not the only factor required to insure that the shrimp grow well. If the amount of dissolved oxygen (DO) in the pond is too low, the shrimp will eat less and there will be more left over food. This will affect other parameters of water quality, and if the water quality drops the shrimp will get weak and more susceptible to bacterial infection. Such conditions lead to low survival rates. When the DO of the water is low, the shrimp's growth rate is slow and the feed conversion ratio (FCR) is very high. It takes longer to raise a batch of shrimp than when the DO is sufficient.

Oxygen is the main limiting factor in both recirculating and traditional aquaculture systems. Less than the required levels lead to poor water quality, poor feed conversion ratios (FCR), reduced growth and increased mortality. With high energy prices, energy efficiency is becoming much more important when comparing aeration techniques and devices.

On the intensive shrimp farms in Thailand, most farmers install at least 36 hp of aerators per hectare to be sure that there will be enough water current to keep the bottom of the pond clean in the feeding areas. The sediment is all swept towards the center of the pond. Naturally, the aerators also help raise the amount of dissolved oxygen in the water so that organic material will be decomposed by microorganisms more efficiently. The DO should not drop below 4 ppm, even in the pre-dawn hours. If they wish to produce large biomass of shrimp, most farms use even more aerators, based on the general rule that you can produce about 450 kg of shrimp for every 1 hp of electric motor aerator.


- Year Established 2011 (13 Years)

- Business License 0311291175

- 967/8 Tran Xuan Soan Street, District 7, Ho Chi Minh City (70000), VIETNAM

- Mail: sales@2lua.com.vn





098 814 6111

0948 617 000

0938 15 4455